Monday, August 5, 2013

Best Practices When Painting Plamo Using Spray Cans

A lot of plamo builders who are now starting to customize their kits have been asking me for tips on how to use spray cans for painting. I do not consider myself as an expert but I have find these best practices to be very useful and they produce cleaner results.


Before we move on, let's identify the pros and cons of using spray cans to better understand how we can use them effectively. Spray cans are readily available in hardware stores—one of the more popular brand is Bosny. These are cheap and a whole can can last for a whole 1/100 scale Gunpla kit. However, these are industrial-grade kits and are not primarily designed for scale models. There are also model-grade spray can available in most hobby shops—the most popular brands are Tamiya and Mr. Color. These are more ideal for scale models but will cost more.

Spray cans do not require tedious cleanup. After you consume a whole can, simple dispose it properly—as opposed to using an airbrush, which you have to clean after each batch of painting or when you change to another color. However, you are restricted by a spray can in terms of precision and the higher consumption rate makes it more expensive than airbrush paints.

Whether you prefer using industrial-grade or model-grade spray cans. Always to remember to wear a mask to prevent you from inhaling paint fumes.

Tip 1: Agitate the Paint Thoroughly

Usually, the instructions on the label tell you to shake the can for 30 seconds. I find it more effective to shake the can rigorously for at least a minute to thoroughly agitate the paint. This causes the paint to become smoother and allows it to fluidly pass through the nozzle when spraying. This produces a consistent spray of mist what will give you even coverage.

Tip 2: Test the Spray

Don't be too excited to start spraying on your kit. Do a spray test either on the air to see if you get a good mist, or on a piece of plastic, such a plastic spoon to see if you have a good, clean coverage. This also unclogs blots on the nozzle, especially on previously used spray cans. Your initial spray can cause these blots to stick to your kit.

Tip 3: Maintain Proper Spray Distance

Spray cans usually have a higher air pressure than what is recommended for model kits, which is 15-20psi. Industrial grade spray cans from hardware stores contain an air pressure of about 80psi. This is because the paint is thicker since they are intended for industrial use—usually, car paints. Model grade spray can usually have a pressure of up to 30-40psi, which is closer to the ideal pressure for model kits, and the paint is thinner. When you start spraying your kit, make sure that the spray can is at least 30cm away from the part that you are going to paint. This ensures that the right amount of paint is applied to your kit.

Tip 4: Use a Sweeping Motion

Don't point and spray. Usually, the initial burst of a spray can is stronger than the continuous spray, which results on a thicker coat of paint. Point you can outside of your kit and then use a sweeping motion—either sideways or vertically, whichever you prefer—across your kit while spraying to make sure you get an even coat.

Tip 5: Spray Thin Coats

Don't worry if your first coat of paint is a bit translucent. You can always come back and apply another coat of paint to make the color more opaque. Also, spraying thick coats also endangers your kit's panel lines.

Tip 6: Paint in Batches

Since spray cans contain higher pressure and covers a larger spray area than airbrushes, spray cans consume paint more quickly. Thus, it is not practical to paint each part of your kit individually. Take advantage of the spray can's large spray area by painting in batches. 

One way you can paint in batches is by painting your kit while the parts are still on the runner. However, the problem with this is that it will be more difficult to clean up nub marks without ruining the paint. You can use a brush to touch up the nub marks after assembly of your kit.

Another way is use painting clips attached on barbecue sticks. Clip the parts and then arrange the them in a piece of Styrofoam. (I use a block of carton made from strips of corrugated boards stacked together, which is more reusable.) You can then paint the batch of parts at the same time.  

Friday, July 12, 2013

Gundam Exhibit at Shangri La Plaza

As Gundam.info kicks off the Mid Year Campaign, Shangri La Plaza features a Gundam exhibit at the mall atrium. The Gundam display is actually a part of a toy exhibit featuring toys from Toys 'R Us.


A selection of Gunpla kits are on sale. Including MG Aile Strike Gundam ver. RM (2,600), HGUC Full Armor Unicorn (2,399), HGUC Unicorn Banshee Norn (1,050), SD Sazabi (650), and HG Oowashi Akatsuku Gundam (1,400).

Works from an in-house Gunpla modelling contest are also in display.























Wednesday, July 10, 2013

New Gundam Anime Series: Gundam Build Fighters

TV Tokyo will air the newest Gundam anime TV series, Gundam Build Fighters, as announced at the Gundam New Video Project conference. The TV series will air in japan starting October 2013.


Gundam Build Fighters, appears to have veered away from the deep political aspects of the Gundam universe to a more youth-oriented feel. Practically, adapting the concepts from the likes of Pokemon and Yu-Gi-Oh. Where characters engage in a global tournament of Gunpla. Yes, Gunpla (not mobile suits), model kits based on the Mobile Suit Gundam anime series, which became popular during the 1980s.

This video project seems to be targeted to reach the younger generations to get into Gunpla. The story appears to promote building Gunpla and engaging them into battle. This is not far from reality. Bandai has recently released the AG (advance grade) line of Gunpla. You build these kits, which come with Gage-ing Chips, and use them to play the Gundam AGE GAGE-ING link system, an arcade fighting game based on the the simple concept of rock-paper-scissors.

The series will be directed by Kenji Nagasaki, assistant director of the Mobile Suit Gundam 00 TV series and movie, and written by  Gundam 00 screenwriter Yosuke Kuroda. Caracter designed have been created by Kenji Ohnuki, an art director for Gundam SEED and later TV series, with assistance from Suzuhito Yusada. The mechanical design line-up includes Kunio Okawara, Junichi Akutsu, Junya Ishigaki, Kanetake Ebikawa, and  Kenji Teraoka.



Tuesday, July 9, 2013

New HG Kits: Gundam Build Fighters

Hungry for rnew gunpla? The new Gundam series, Gunpla Build Fighters, will be starting with the HG line of kits. The initial salvo will consist of the three main Gundams in the show.

(Captured from HLJ.com: from left to right) Build Strike Gundam Full Package, Zaku Amazing,  Gundam X Mao
1/144 HG Build Strike Gundam Full Package
  • Planned release: October 2013
  • Built by Iori Sei, this model is based on the Strike Gundam
1/144 HG Zaku Amazing
  • Planned Release: October 2013
  • Built by Yuki "The Crimson Comet" Tatsuya, this model is based on the high mobility Zaku
1/144 HG Gundam X Mao
  • Planned Release: November 2013
  • This model is based on the Gundam X
  • Includes a power-up version of the Hyper Satellite Cannon, with all reflect thrusters reproduced.

Custom Parts

Bandai will also release Gunpla custom parts from the Gunpla Build Fighters series that are said to be compatible with your existing HG kits. These are the booster packs that transform to flight mecha.
(Captured from HLJ.com: from left to right) Build Booster, Amazing Booster
HG Build Custom 1/144 Build Booster

  • Planned release: October 2013
HG Build Custom 1/144 Amazing Booster
  • Planned release: October 2013


Thursday, June 20, 2013

Plastic Print Outs by Playing Mantis

3D printers are an engineering marvel. In a short period of time, you can create a mock up of your design, done using a 3D software like Autocad or Maya, straight from your desktop screen. During ToyCon 2013, I was able to see this amazing machine in action at the Playing Mantis booth.

Playing Mantis is a group of game and toy designers based in the Philippines. They design and produce ideas for original or customized toys. And, they use 3D printers as a means to materialize their designs to something you can actually hold, feel, and manipulate. Yes, manipulate. If your design is composed of moving parts, the printer will print them also as moving parts. This is similar to the inner frame runner of a real grade Gundam model kit.

3D printer in action
The 3D printer Playing Mantis featured at ToyCon is the hobbyist-friendly model. It uses ABS (acrylonitrile butadiene styrene) plastic, the same type used in gunpla, to produce its output. The finished product is a bit rough and needs needs a little sanding but the ability to produce custom designs with a push of a button is rewarding enough.

Before you go running off to buy a 3D printer, there is a bit of a catch. It may say hobbyist-friendly but this little contraption costs about 70,000 pesos. High-end models, which are usually used for advance engineering, costs up to more than 3 million pesos.

Playing Mantis designer holding a Zaku head 3D print out
Although the machine comes with a printing software, it doesn't come with a 3D designer software. This means, you will have to have a 3D designer software as well as knowledge about creating 3D designs. But don't fret, Playing Mantis offer design and printing services. They also have access to the high-end 3D printers which can use other types of plastic, such as silicone and clear plastic. A five inch figure usually costs 4,000-10,000 pesos, depending on the complexity of the design.

So what's the relevance to us gunpla modelers and customizers? If you can imagine a one of a kind weapon, backpack, a replacement or custom part, or even your own gundam, a 3D printer can materialize your design. As Playing Mantis puts it, "If it doesn't exist, we can help you produce it."

For more information about Playing Mantis, visit their Facebook page: https://www.facebook.com/playingmantisphilippines

Tuesday, June 18, 2013

Taga-ilog was at ToyCon

If you read Culture Crash magazine in the past, you probably remember the comic book artist known as Taga-ilog, Melvin Calingo in real life. He often represents himself as a character with a bucket  for a head in the magazine, alongside Dha Boss (Jescie James Palabay), I.Q. 40/Memer II (Elmer Damaso), J.I.O. (Jerard Beltran), and Taga-Kanal (Michael David). I met Taga-ilog during ToyCon 2013 at SM Megamall and the first question that I asked him was, "Asan na si Kubori Kikiam?"

Taga-ilog, the Buckethead of Doom
Culture Crash was a bi-monthly magazine that started in 1999, when anime was at its high, and sadly ended in 2004 with issue #14. The magazine featured anime-styled comic series, which include the sci-fi Solstice Butterfly, modern day teen-serye One Day, Isang Diwa, fantasy Cat's Trial, uraban action Pasig, and deliciously funny Kubori Kikiam. The artwork may be Japanese-inspired but the characters, theme, and content shouts Filipino. CCCom's claim to fame is that they created their own process to make comic books.

Day two of ToyCon, I was passing by the Komikon booth, and I saw the familiar art of Pasig in black and white. I can only identify the CCCom artists via their avatars and the man behind the booth did not have a bucket covering his face. It was only when I asked for his pen name that I realized who he was. So I got a copy of Pasig, a little chat with the artist and left. I came back to his booth twice. First time to get a photo (as seen below) and second time to get his autograph. It was a little embarrassing because I kept bothering him for things I should have asked for in the first place.

Melvin Calingo (Taga-ilog) with Pinoy Gunpla Modeler

So where is Kubori Kikiam these days? Taga-ilog told me that he only appears during Komikon and Indiket. The next Indieket will be on August 10, 2013 10AM-7PM at the Bayanihan Center, Pasig City. Needless to say, I will be going.

Friday, June 7, 2013

Man of Steel: Defender of Earth Exhibit Launched

To intensify the hype for the upcoming Superman movie, Man of Steel, the first ever Man of Steel: Defender of Earth Exhibit in the Philippines was launched last June 7, 2013, at the SM Mall of Asia Atrium. Man of Steel stars Henry Cavill, Amy Adams, Michael Shannon, and Russell Crowe, and directed by Zack Snyder.


The exhibit features toys from the collections of Jeffrey Velasquez, Jeffrey Quillope, and Mae/Tochi Pimping, Superman clothing line display by Penshoppe, limited edition Man of Steel watch by Axis, photo booths, and activity areas that kids of all ages can enjoy. The exhibit runs from June 8 until June 16, at the SM Mall of Asia Atrium.

Highlights from the Man of Steel: Defender of Earth media launch:

Azrael Coladilla invites everyone to ToyCon 2013
Fashion show by Penshoppe, featuring their Man of Steel clothing line
Philippine Allstars grace the stage with super dance moves
Raffle prizes given away, including a Devant LED TV